Who am I and why the hell should you care about reading my blog?
Saturday, August 30, 2025
Fear
Saturday, August 9, 2025
Well…. Damn, that happened.
Life has a funny way of intervening when things start spiraling out of control. Call it fate, karma or maybe even divine intervention, but whatever you choose to call it, it’s almost always out of our control, and it almost always makes us stop, or slow down, and reevaluate just what the hell we’re doing.
You may be wondering what has gotten into me, to make me go on about this… well, to not go into too many details, I recently had a little accident while working at home, that resulted in, what could have been, a very serious injury. I’m not one to dwell on “what could have happened”… far from it, actually, but this one was different. Mainly because I didn’t know how bad it actually was, for several days.
In a nutshell, while doing some yard work- I sustained an eye injury that immediately altered my vision. A quick trip to the ER resulted in some meds, an eye patch and a follow-up with an ophthalmologist, along with a “don’t drive, don't ride motorcycles and don’t lie down flat” order- not great for a guy that drives for work, rides for work (and leisure) and lies down flat at least once a night. After a visit to the eye doctor, I was able to lose the eye patch, so my days of Pirating were over before they started, and the doc also loosened the driving restriction a little, but held the motorcycle restriction in place. While my eye still isn’t working the way it is supposed to, the biggest blessing is- I didn’t lose my vision!
Why am I sharing this with you? Well, it’s simple really… just when you are so busy, with so many different things going on, when you’re too busy to take a break, sometimes, life intervenes and says “Enough! Stop, or I’ll stop you!” That’s what happened to me.
You see, I’ve been running, hard, for the past few months. I recently learned that I can retire from my payin’ gig… as of right now. But, I still have several things that I want to get done before I clock out for the last time, and I’ve been battling with the decision on whether or not to drop my retirement paperwork.
On one hand, I can play it safe, stay where I am and get those things done; and on the other hand, I can retire and start my new career as a full-time writer- finishing my novel and writing this blog more often than I have been- and getting some kind of fun, part-time, job to earn a little beer (or more likely- motorcycle parts) money, on the side. It’s a tough decision, especially since I’ve been doing what I do for such a long time. Add to that- I’ve also been working hard to get some bills paid off, fix some things around the house, trying to keep up with regular maintenance on the cars, house and motorcycles, and trying to keep up with new tasks (and frustrating situations) that keep coming up at the payin’ gig. It’s been a whirlwind for the past few months, and I have kept saying, over and over, “I’ll take care of that when things slow down a little.” Well, this past week, life took control and slowed things down for me.
Mechanically speaking- it’s a lot like a bearing failure. One minute, everything is running smooth, then all of a sudden, for no apparent reason, you hear a horrible sound and everything starts grinding to a stop. It wasn’t for no reason, though. The bearing spun too fast, for too long, and got overheated, overworked and then… it failed and seized. A bearing is typically pretty easy to repair, but… in order to do it, you have to stop the machine, take it all apart, and then put it all back together again, making sure that everything is in it’s right place. Then, you don’t just go full speed again, no, you start out slow, making sure that everything is right. Then, you slowly bring everything back up to speed and, before long, you’re back up to 100%. That’s what I’m doing now. I’m taking time to write a few pieces on the blog, a few chapters in the novel, and contemplating my next move, taking it nice and slow, making sure that everything is in the right place, and that it’s all working right, before I go full speed again.
My biggest fear with this injury was losing my eye. Wearing the eye patch gave me an eery insight (see what I did there?) into what partial blindness would be like, and the reality of how something like that could impact my daily life was startling, to say the least. I’m not glad it happened, but I am glad that I have learned the valuable lessons that I’ve learned from it. Riding motorcycles is a large part of who I am, and not being able to do that would be devastating for me in several ways. Writing is another, and while I could still write with one eye, you don’t realize how mush easier it is do basic things like that, with both of your peepers… until you don’t have both of them to use.
To wrap this up, I’ll leave you with some advice- Don’t get too busy, or in too much of a rush, to take the proper precautions to avoid getting yourself in a bind. Whether that means taking a few minutes to put on safety glasses, or taking a few days off of work to rest, and reset, yourself. No matter what happens, if life does have to intervene on your behalf, and force you to slow down for a few days, then don’t get mad, sad or dismayed by it- instead, take the time to reevaluate, repair and reset.
In the famous words of Ferris Bueller, “life moves pretty fast. If you don’t stop and look around once in a while, you could miss it.”
Till next time, MotoReaders, Ride safe and wear your safety glasses.
Tuesday, August 5, 2025
Harley-Davidson Sprint
It’s that time again, folks! That wonderful time of the year when some manufacturers start teasing, and some start releasing, new models! It’s one of my favorite times of the year!
2026 Harley-Davidson Sprint
I haven’t heard much yet, but I just read that Harley-Davidson is about to release info on an all-new entry-level motorcycle, that harkens back to a previous time in their history. The new bike is set to be called the “Sprint”, after the popular model that they introduced in the early 1960s, after partnering with then, Italian manufacturer Aermacchi.
These days, many people whine about the MoCo’s affiliations with other manufacturers building motorcycles for them, such as the Street 500 and 750 models, originally built in Bawal, India and primarily intended for the Middle Eastern market, or the all-new X350 and X500, built in China and primarily intended for the Asian market. But, our beloved Milwaukee, USA purveyor of fine motorcycles has not betrayed it’s American roots, far from it. They are a corporation that is surviving in a very challenging market… and they have been doing so since 1903. The reality is- survival is ugly sometimes. It often demands unconventional and, sometimes unpleasant, acts to be carried out, in order to be able to live, and in this case- produce motorcycles, another day. For example- guy that got trapped by a boulder while hiking and had to sever his own arm to be able to live another day. While I’m not suggesting that H-D cut off an appendage, here… I am saying that sometimes, in order to survive a struggling market, it requires a partnership that may not be the most popular with it’s traditional customer base. If, however, the partnership expands the customer base… and the company can survive another year, or five years, or a hundred years, then it was worth it.
Beginning in the 1960’s, Harley-Davidson partnered with several companies, three of which in particular brought the MoCo through some of their toughest times and helped them survive when many other American motorcycle companies were failing: Aermacchi and their small displacement motorcycles helped expand the Harley-Davidson name plate into the European markets and helped form a love for Milwaukee steel overseas, that still exists to this day; Tomahawk Boats ushered in a new era of design possibilities and manufacturing facilities that gave us things like the Boat Tail Super Glide, hard side saddlebags, tour packs, and fairings for the immensely popular Electra Glides, Tour (and later, Road) Glides; and of course, the American Machine and Foundry company, quite literally, saved the MoCo from financial ruin. While none of these were probably very popular at the time, all served the greater purpose of helping this American institution survive and that, my friends, is the name of the game because once a company shuts down, if it ever does come back, it will never be the same as it once was.
The Bike
Currently, there’s very little information about the new Sprint, except that it is supposed to be revealed to dealers this fall, but what we do know for now, is that it is expected be a small displacement, inexpensive and entry-level motorcycle. There’s still no word on where it will be built, but I suspect it will be manufactured overseas initially, or perhaps, built in the US of A, with parts imported from overseas plants.
What I find interesting though, is I’ve heard so many people already bashing it, and bashing the MoCo for building an “entry-level” bike. Just yesterday, I saw a social media influencer (who I typically agree with on a lot of points), bashing the MoCo over the new Sprint and saying that all “we” want is a “new EVO” engine because the “EVO was the best engine ever built by Harley-Davidson.” The EVO was a good engine, sure… but ”the best”? I don’t think so, not by a long shot. Every engine that H-D has made through the years was the best, until it was replaced by something better. The Knuckle was better than the Flathead, the Pan was better than the Knuck, the EVO was better than the Pan and, yes… I’m gonna say it… the Twin Cam was better than the EVO… and I know that I’m about to get bashed for that one, but it’s true- I’d take a late model TC96 or TC103 over an EVO any day. BUT! Before anyone decides to start roasting me for MY opinion, let me remind you that everyone has their own opinions based on their own experiences… mine are no different. I’ve gotten great performance (and no oil leaks) out of the 5 different Twin Cams I’ve owned, while I had two different buddies that had “late model” EVO’s that coudn’t keep a seal between the jugs and the crankcase. Now, before anyone says, “well Mr. MotoWriter, why does S&S Cycles build so many EVO clones, then?” My simple answer is this- because 1. The patent ran out and they can, 2. They’ve had a chance to fix the problems and get it dialed in properly (I never said it wasn’t a good platform for a great engine) and, 3. They also make updated versions of the Knuckle, Pan, Shovel and M-8. One could argue that the reason they don’t build a Twin Cam, is because the stock H-D TC is already dialed in, easier to get and significantly less expensive than the others.
As for the Milwaukee 8- I have a first generation M-8 107 on my Road King Special, and a 96” Twin Cam on my Dyna Street Bob… I’ve also had a couple of late model 103” Twin Cams and an early model 96” and I will honestly say that, in my very humble opinion, the M-8 is a superior engine to the Twin Cam. I’ve heard horror stories about the first gen 107” M-8’s having issues with oil sumping, cam chest and oil pump failures and, maybe I’m just lucky or perhaps it hasn’t happened yet, but mine has not given me any issues with any of those components (like I said, not yet, anyway). Maybe it’s because I ride it like I own it, and like I am the one that is responsible for paying for it when it breaks, or maybe, I have just gotten lucky, I don’t know… but regardless, my opinions are based on my experiences, so I’m willing to acknowledge that others may be (and apparently are) very passionate about theirs, based on their experiences.
Regardless of where your opinion lands, I’ll disagree with my guy on the ole interweb socials and say that, while I’m not in the market for an entry-level, small displacement motorcycle- I think it’s great that the MoCo is thinking about their future survival and making adjustments to get new riders into the sport, and hopefully making some of them passionate loyalists to the brand so that hopefully, it will carry them through the tough times.
What is “Entry-Level” anyway?
Easy- entry-level can be quantified in two words: size and price. Let’s face it- motorcycles are, inherently, dangerous and, in order to get someone on a motorcycle for the first time, you need to have a machine that isn’t too powerful, heavy and intimidating. Pricing is also incredibly important, as well, because you don’t want to have the perfect machine, but make it so expensive that it can’t be bought by someone who is just getting into the sport, especially when the competition is fierce in this segment.
The new Sprint is expected to be around $6,000 US and I think that is spectacular. People won’t buy what they can’t afford anymore. When I bought my first new H-D, I was in my mid 30’s and, at the time, I honestly never thought I’d be able to buy a Harley-Davidson at all, much less a brand new Road King Classic. It was expensive and, in all reality, I probably shouldn’t have bought it because there were times that I struggled to pay the note, but it was worth it to me (and my lovely wife supported it, wholeheartedly), so I took the leap and did it. This new generation is different though- these kids now are very money-conscious and they are very conservative in the way they spend their money. I would venture to guess that the MoCo loses hundreds of thousands of dollars each year in potential new riders, because of the costs and availability of their machines. Not that a solid and sustained resale value is a bad thing- it’s not, however, by comparison, a new rider looking at the offerings in dealerships and in the used markets, could be easily put off of H-D by the prices alone. For example, a large displacement Japanese bike, like the Yamaha Stratoliner or the Honda VTX1800 can be had for under $6,000 used, compared to a used Harley-Davidson Road King or Street Glide that will cost you easily over $10,000 for the same or similar year models. That is because the import bikes simply don’t hold their value like the Harley’s do. Those are typical prices of large, heavyweight bikes, too… their smaller counterparts can be had for even less, where the smaller H-D’s are still pretty expensive. For example- a 2006 Yamaha V-Star 650, which is a very easy bike to ride, can be had for around $1,500, compared to a 2006 H-D Sportster 883 that is selling for around $3,000. Again, that’s the difference between resale values- and, while that’s a good thing for H-D owners, it’s not so great for the MoCo when you consider that most new riders will almost always opt for the cheaper bikes. And before you argue that comparing used bikes to new bikes is like comparing apples to oranges, I’ll remind you that the least expensive new Harley-Davidson in the current lineup, the Nightster, is priced at $9,999 before dealer fees, where the comparable Yamaha Bolt R-Spec, is sitting a clean $1,000 less, at $8,999. Does a grand make a difference to someone like me? Right now- not really… when I was first starting out- absolutely. Currently, Yamaha’s lowest priced “cruiser style” motorcycle is the V-Star 250 at $4,799… so, if H-D can enter the market with a bike with double that displacement, but not double that price, I think it’s a strong move for Milwaukee.
The fact remains that this new generation is looking at the overall value for their dollar and, let’s be honest, why would a young, new, rider buy a 2008 Road King for $9,500, when they could buy a 2008 Roadliner for $4,500? After all, the 2008 ‘Liner has a 113 ci engine compared to the 2008 ‘King’s 96 ci mill. It’s a dollar for displacement disparity that favors the Japanese bike. Brand loyalty is often born with a first motorcycle, too… so getting someone into the culture of Harley-Davidson is imperative to gaining them as a lifelong customer. Don’t believe me? How many H-D loyalists started out on one of those very early single cylinder bikes (like the Hummer or the original Sprint), or more currently, on a Sportster? The EVO Sportster is probably the most popular motorcycle ever built by Harley-Davidson if you go by how long it was made, and total units sold (and are still sold in the used sector, today). The EVO Sporty used to be very affordable, with many of the basic models selling for close to- you guessed it- the $6,000 mark, so it’s my belief that this new Sprint’s pricing is right on par with being a, potentially, very successful offering for Harley-Davidson.
Final thoughts
Hopefully this new bike is well-built, has the American soul of a Harley-Davidson motorcycle, performs well and, unlike the failed Street models, is reliable and well designed. I think one of the biggest reasons the Streets failed so miserably, isn’t because they were small displacement and low priced, but rather, because of the design. They didn’t look like a Harley, they didn’t sound like a Harley and they were not well made, at all. While ole Jochen is out, and this new bike was developed and designed under his leadership, hopefully, it is more than just a re-badged Chinese bike (like the X-440 trainer bikes), and better than the absolutely awful Street that was born, and built, under former CEO, Matt Levatich’s leadership.
For now, we’ll just have to wait and see, though. As for me, I am choosing to be optimistic about the new Sprint. I’m hoping to see a new single cylinder, fuel injected cruiser (or maybe even a sportier version for the kids that like to go zoomy-zoomy), a sharp, distinctly American design, and more importantly- very well built, with high quality components.
Until then… Ride safe and make good choices, MotoReaders!
Saturday, July 12, 2025
The Final Lap
The Final Lap?
Greetings, my loyal MotoReaders! I know it’s been a while, but I’m still here. As you know, or may have noticed, there are usually a few times a year that I “disappear” for a few months. That is because my paying gig requires all, or most, of my free time a few times a year, and when I do manage to have time off during these months, my “creative juices” either dry up or I sweat them out. Thankfully, though, these “tides of activity” ebb for a bit and I can get back to my creative writing and, more importantly- back to riding my motorcycle, which often is the best way to get that creativity flowing again.
As I’ve mentioned before, I’m dangerously close to retirement. Now, before you go thinking that “retirement” means a Floridian neighborhood with socks, sandals, Hawaiian shirts, khaki shorts, golfing, crafts and planned events each night… I assure you that, no… I don’t mean that kind of retirement. You see, those that know me personally, know that my line of work allows for retirement at a specific waypoint in my career. This means that, while I don’t have to retire, I can. I’ve had to make a few accommodations to make it happen, but those are 97% done and just about the only thing left to do is file some paperwork to start the actual retirement process.
One could analogize it like this- I’ve been racing… lap after lap, and now the white flag has been waved. The only question left is- is the white flag warning of a slow moving racer… or is it telling me to get ready for the final lap?
Fuel Level- “DANGEROUSLY LOW”
What if, then?
Saturday, May 3, 2025
Well, This Won’t Look Good On My Resume’
Sunday, March 30, 2025
Here we are….
Time flies when you’re working hard
Well MotoReaders, 2025 is well underway and I just realized that I haven’t posted anything since January! They say that time flies when you’re having fun, and I suppose that’s true, but I can tell you… time also flies when you’re working hard, too!
You may be wondering what has had my attention pulled away from the ole’ MotoWriter blog site for the past few months? Well, as I mentioned before, I am currently in the process of writing a book and, as you might imagine, that takes a lot of time and creative energy. While I’m not sure when I’ll finish it, I’m anticipating that it may be sometime, relatively speaking, soon.
My regular, full time, “payin’ job” has been ramping up with activity as we enter the event season, so there’s always that distraction this time of year. I’m also exploring another professional opportunity, which has the potential to really change the dynamic of my daily routine, so I’m anxiously pursuing that. Maybe, hopefully, I’ll get some good news and be able to share that with you in the next few months or so.
Of course, I’d be remiss if I failed to mention that the weather here on the South Coast this spring has been incredible, so I’ve been getting as much riding in as I possibly can. If you’re wondering- yes, it’s been raining all morning… hence my update today.
Not much else to talk about… except…
Now, when I say that there’s not much to talk about… please understand what I mean… there’s PLENTY to talk about in the world… but I made a point a long time ago, when I started this little writing/blogging venture, that when you good folks visit the MotoWriter’s corner of the interweb, you weren’t going to have to read about all the rest of the crap that we are bombarded with every single day, for hours a day. These days, there is no escape from it- it’s on the television, social media (ugh- it’s the worst), on the radios and in the newspapers (where ever those are still being printed).
Here in my little corner of the internet- you get to breathe freely. You get to be who you are, believe what you want, like who you want, vote for whoever you like and ride (or drive) whatever you like, without judgement, influence or persuasion. I don’t want your money and I’m not trying to sell you anything, and I intentionally keep ads off my site so that no one else uses my site to try to get your money.
The only persuasion from me, is to try to get each of you to live your life fully, embracing each day, savoring every moment, while respecting each other and being kind and considerate to everyone you meet. Don’t take your loved ones for granted… spend time with each other. Appreciate the time you have with them, then make a point to spend a little more time with them.
In motorcycle news
The Indian lineup looks good, and I do like the different engine options they have. I do think, however, that they are trying to phase out their air cooled engines, and I believe that this is their way of doing it. Offer the air cooled and liquid cooled engines in the bikes that only had the air cooled option, then base the decision on sales. It’s no secret that air cooled engines are less efficient than liquid cooled mills, but the aesthetics are inherently different and there is still a perceived simplicity of the air cooled mills. I emphasize perceived, because if you’ve ever worked on one of these new air cooled, or twin cooled, engines, you understand that there is little that is “simple” with them.
Where Indian is dropping the ball, in my humble opinion, is their lack of new models and model changes. Harley-Davidson has several bikes to offer new, or seasoned, riders. H-D is spending a lot of money (and taking serious financial risks in doing so) to try to entice a new generation of riders to get on two wheels. Polaris seems to be resting on it’s laurels on design, and they have made no real progress on building a dealer network. I’ve said it before- this is where Milwaukee is undefeated and why they take the lion’s share, and have for over 120 years. I can be practically anywhere in the US of A and still be within an hour or so of a H-D dealership. A dealership, specific to H-D and H-D products. I’m currently over an hour away from the closest dealer that carries Indian motorcycles as part of their wide selection of largely imported motorsports equipment and vehicles. I want to go into an Indian dealership and see 8 Chieftains, next to 6 Challengers, 10 Chiefs and a dozen Scouts, all in different colors with varying options. I want to be able to peruse the parts and gear, and know that everything in there will be brand specific. I want the sales crew to be able to answer any and all questions I have about the different Indian models, and even be able to give me a history lesson on the company, as well as, some confidence about the future of their company. That’s what you get with Harley-Davidson… every single time you walk through a dealership’s doors.
The sun’s coming out…
Saturday, January 18, 2025
Happy New Year!
Happy New Year!
Well MotoReaders, 2025 is here and I hope it’s been good for you so far.
2025 has gotten off to a pretty rocky start so far, but let’s all hope and pray that it gets much, much better for all of us as we get further in.
Having said all that, let’s lighten the mood up, by talking about what possibilities the new year may bring.
Motorcycles
It looks like Harley-Davidson has some new stuff up their sleeves for the Softail lineup, but I suspect it may be limited to a new set of colors, some engine upgrades and maybe, just maybe, a “new” model. I’ve heard rumors about the return of the V-Rod in 2025, so we’ll see what the MoCo does with that. I’ve also heard rumors (for months now) about a new Pan America model, featuring the 975cc RevMax engine, that may be coming soon. Of course, that begs the question, if they offer a 975 Pan Am, would they possibly release a 1250 Nightster, or maybe even the long sought after Street Fighter that was conceptualized several years ago? Only time will tell, but the Softails (and possibly others?) are set to be announced on January 22nd, so maybe we’ll get lucky and get a few new models from our favorite Wisconsinites to tempt and tantalize us.
I haven’t seen or heard much from the other guys, but after perusing the interweb, I saw that Indian Motorcycles is teasing a big reveal- a potential new model in their PowerPlus lineup, on January 24th. They’ve also released a few updates to their Scout models that they seem pretty proud of, too. I really hope that Polaris invests more time and energy into the Indian brand, because I truly believe that the rivalry between Harley-Davidson and Indian is good for both companies and most of all, good for us as riders.
Janus Motorcycles, the small boutique company in Goshen, Indiana USA, has released a new model for this year- the Gryffin 450, a small displacement scrambler for those of us that like to get off-road every once in a while. For my loyal MotoReaders, you’ll remember that I’ve written a few posts about Janus Motorcycles (click here for the first of those). I really like the company and how they’re doing things and I hope to see them continue to grow. They really embody the American spirit of innovation and rebelling against the status quo.
Buell Motorcycles is keeping their lineup lean, with most of their media pushes focusing on the new Super Cruiser that they are hoping to begin production on in the fall of this year. With an estimated 175hp and a 100hp of torque, the “Dyna Bros” will surely love it. But they might want to skip buying that extra pair of checkered Vans, Dixxon Flannel and PBRs in order to save up enough dollar bills to put one in their mom and dad’s garage, because at an entry price of $25,900… they might not be able to put their T-bars and cafe fairing on it. By the way, if you’re a “Bro” reading this and you’re not chortling at this good natured ribbing, relax- I’m just poking a little fun at you…besides, without you guys, my Street Bob wouldn’t be worth as much as it is!
The big four from Japan (Honda, Yamaha, Kawasaki and Suzuki) all seem to be keeping to their previous lineups with little more than new colors and fairing options being the biggest changes. I will say that I think it’s pretty cool that Honda is still offering their factory chopper- the Fury. It’s just an overall cool bike. Also worth a mention is Kawasaki’s retro cruiser, the W800- it’s a full-on throwback to the days when Japanese motorcycles weren’t trying to look like the American machines and, by god, I respect that individuality.
The Brits seem to be keeping in step with the Japanese companies, as the BMW and Triumph websites don’t appear to have anything truly new coming in ‘25. Triumph is, however, offering a few new model options; in the Tiger series- smaller 660 and 800 offerings of their popular ADV line, and in their Speed line- a couple of “new” twins- a 900 and a 1200 could bring some new riders their way.
The Italians, Moto Morini and Ducati seeming to be resting on their laurels for 2025 and, let’s be honest, they can. While Moto Morini is, only now, really starting to make waves stateside, offering Italian engineering for a relatively affordable price, Ducati still remains the king of the “boot” bikes (and king of a few others, too). Their lineup is desirable enough that they don’t need to offer anything new… although, curiosity does make me wonder what a Ducati Cruiser might look like. Maybe one day we’ll see?
Rides
Retirement?
New opportunities