I Busted My Gas Tank!

I Broke The Leg Breaker!

Okay, the photo may be slightly altered to make the affect hit a little harder, but you get the point. 

The Honda XR600R is famously, or rather, infamously, known as "the leg breaker." It's a big bike. At 591cc, this air-cooled, high compression, kickstart-only, monster makes 46 hp and over 38 ft lbs of torque in stock form. In stock running order, it weighs in at over 320 pounds. Add a 5.8 gallon aftermarket gas tank, and you can easily add another 20 pounds to that. 

Since my last dirty bike post, I took another solo ride in the National Forest, where I started getting a lot more comfortable on the bike, and felt like I was actually starting to hone some of my off-road techniques  bit. I had a good ride that day, even though I was only out there for a couple of hours. I left that day feeling pretty good about myself and my off-road riding, so when it came time to meet up with the guys the following week, I was all about it.

Physical Exertion And Dehydration

I decided to video the ride, since we were all riding together and I figured some of the other guys might like to re-live their day through my camera lens, too. The day started out great, but pretty soon after we got on the trails, one of the guys had a family emergency, and had to head home, so we made a quick run back to the trucks. After helping him get loaded up, the rest of us went back out and kept riding. Everything was going great until a log crossing, one that I had successfully crossed in my first solo ride, kicked my butt. You know how they say, that if you're gonna be dumb, you gotta be tough? Well, it's a good thing I'm tough. Tough or not, after that debacle, I was still pretty gassed. I took a water break, regained my composure, and started riding again. Apparently, I was stuck on that obstacle, behind the guys, for so long that one of them circled back to go look for me.

Back Together

Once we were all back together, though... the ride continued, and I was feeling a lot better. We were all riding pretty hard... even though those guys are much better off-road riders than me. One guy has been riding off-road for, easily, half his life and the other, well... he's a class-A Enduro rider. I felt like I was riding pretty good, though, and a good bit faster and more confidently than I had been, especially compared my my first couple of rides. That is, until I took a simple spill and realized that I was getting dehydrated and physically exhausted. In my defense, we had been riding for a while, and the South Mississippi sun was bearing down pretty hard. The trails were still very wet from recent rains which made the trails hot and humid, especially when stopped. I knew that I was just about spent, but I think my ego, and maybe my immature mind, wanted to keep riding. Big mistake.

Target Fixation

As a motorcycle instructor, I tell my students all about target fixation. Basically, you go where you look and, just like riding on the road, on the trails, you have to look far enough ahead to avoid any obstacles... like small trees. I could keep going on that, but instead... I think I'll let you watch for yourselves:

https://youtu.be/zSn1RQqul7w?si=S0s-OA6GOTnhw3yt

Lessons Learned

The bike didn't explode like in the movies, but finding parts for a 37 year old dirt bike can be tricky, so it did blow up my bank account a bit. I was able to find a used gas tank, but it cost me as much as a new one would have. The fuel petcocks from my old tank wouldn't fit the "new" tank, so I had to order a new one of those, too.

This little incident made me realize that my "retirement body" wasn't cutting it, so I started a workout regimen to get myself in better shape. I'm not trying to bulk up, by any means, but I do need to improve my overall strength and stamina, in case I have to push this heavy bastard out of the woods in the future. It also got me looking for a newer, smaller and more manageable off-road bike, one that will be easier to throw around on single track trails, will have better brakes, and most importantly- won't be so dang tricky to find parts for. Until that happens, though- when I'm not on my Harley, I'll still be out in the woods throwing this big hoss around, and trying my best to stay upright and, hopefully, not running into any more trees. 

Keep an eye out for some upcoming MotoReviews of my riding gear and, as always MotoReaders...

Ride Safe and Make Good Choices!

MotoReview- Rabaconda Tire Machine

MotoReview- 

Rabaconda Street Bike Tire Machine

Greetings MotoReaders! Are you ready for another MotoReview? I sure hope so, because today, I'm talking about the Rabaconda Tire Machine. I'm sure you've seen their ads on social media and on a variety of websites, and if you've seen their video ads, you must be wondering... is it really that easy to change a tire using this thing and, more importantly, is it worth the price? 

Background

Now, I've been working on my own motorcycles for several years now, and I do just about everything from basic maintenance, to upgrades, to mechanical repairs, to electronic diagnostics and repairs. The one, pretty basic, thing that I wasn't able to do though, was tire changes, and that just didn't sit right with me. Don't get me wrong, on small motorcycle tires, like what's on the Janus or Twinstar, I could easily do those with some tire irons, but if you've ever tried to change a stiff sidewall touring bike tire with irons, you know that it's worth the money to bring it to a shop. Bringing my wheels to a shop has always been a point of contention for me, though. I'd have to get the wheel off the bike, load it in the truck, drive for almost an hour to get to my closest shop, then wait for them to get around to mounting and balancing the new tire, or tires, which usually had me waiting for a couple of hours. Then, after paying the shop anywhere between $50 and $100 bucks, I'd have to drive all the way back home to put the bike back together. The worst part is the time wasted, the second worst part is the money. Not to mention, most shops have now started refusing to mount and balance walk-ins... meaning, they want you to bring your bike in so they can do the whole job. They say that it's a safety issue, that they want to be able to guarantee that the wheels are put back on the motorcycle correctly, but the real reason is, they can only charge about a half hour on a walk-in tire change, but to remove it from the bike, the job rate goes up significantly. Enter the Rabaconda.

The "Ultimate Kit"

First of all, tire machines aren't cheap, so when I decided to actually buy one last year, I gave a lot of thought to how I would, or could, use it. When I looked at all the options, I had to look at this as an investment that should be able to pay for itself over a reasonable period of time. Certain considerations were: the overall cost of the machine compared to my personal savings; the ability to pay for itself; the time saved by using it; and of course, the overall quality, craftsmanship and customer support of whatever machine that I chose.

After looking at several options, I decided to go with the Rabaconda "Ultimate Kit." Now, I also added their Balancer Kit to my order, as well... even though they offered the machine and balancer in a seperate kit. The reason why I did it this way, is because I knew that I was going to be working on other people's motorcycles, as well as my own. The "Ultimate Kit" came with several more pieces that allowed it to accommodate a variety of wheels. If I was only going to be working on my own motorcycles, I would have chosen the lesser expensive option.

My Investment

As I said, I bought the "Ultimate Kit" in July 2025. By adding the "Balancer Kit", I paid just under $1,200 for everything. So, what did I get for my money? The "Ultimate Kit" consisted of the following:

• Street Bike Tire Changer
• Drop Center Tools (2)
• Two spindles- standard and 15 mm
• Wheel support riser brackets
• A tub of bead grease mounting lube with brush
• BMW shaft drive adapter
• Duck Head Kit for croass-spoked wheels
• Universal Big Hub Adapter
• 16" tire iron with plastic protector sleeve

The "Balancer Kit" consisted of:

• Wheel balancer
• Wall mount bracket 
• Wheel weight remover knife
• Two allen keys-one to assemble balancer and one to adjust the axle/balance shaft
• User manual (for the nerds)

Both kits come with their own storage/ carrying bags, if you might be inclined to take it with you somewhere, like a track event, for example.

The Value

The word "value" is defined by Merriam-Webster as "the amount of money that something is worth." So, how do we determine what something is worth? Well, I'm sure that everyone uses their own metrics here, but for me, I use a complicated algebraic formula, and if you know me at all, you know that is absolutely not true! No, no formulas for the ole MotoWriter, instead, I use my gut instincts. I determine value by how much time, money and effort I save by doing it myself. I also look at the overall convenience of having a set-up like this in my own garage, so when I do have someone bring their bike to me for some work to be done, I don't have to send them somewhere else for tire work. 

As I mentioned before, I'm almost an hour from my closest Harley-Davidson dealership. There's a couple of independent shops that are a little closer, but not much, so by keeping my tire work in-house, I save the most valuable resource I have- my time. As for the monetary value, I do get a little more analytical. For example, if a shop charges say, $50 per wheel for a walk-in mount and balance- that's me bringing my wheel and new tire to them, I'll drive a little more than 70 miles, there and back, with gas prices being about $4 a gallon. My old truck gets around 25 miles per gallon, so I'll have another $10 or so in fuel cost. So, for example, one tire mounted and balanced will cost me a minimum of $60 and no less than three hours of my life. That's for one tire. If I bring two tires, I don't use any more fuel, but the price of the service doubles to $120, and it's going to take even more of my time. 

For my own personal investment, I would need to do about 20 tire changes on my own motorcycles to justify my $1,200 purchase from Rabaconda. It would take decades for me to make up for what I spent, if I was only looking at the money. So what's my time worth? A lot, actually. But even with the time I'd save by having this set-up in my garage, I'd still need to do a lot more tire changes than I do, for me to feel better about such a costly tool. So, where I'm able to offset that investment a bit, is by working on other peoples bikes, helping them out and every so often, making a few bucks for my troubles. 

What Can It Do?

I can only speak to what I've done so far, but I have mounted tires on 16", 17" and 19" spoked, tube-type tires and 16", 17" and 19" tubeless mag wheels. I've changed tire widths as narrow as 130 mm, up to 180 mm and the machine handled them well. Obviously, there's a little more work to do on the tube-type tires, as you have to be extremely careful not to pinch the tube during installation, and you have to make sure the tube doesn't slip when you're lining everything up, but overall, the machine works as you'd expect. It takes some effort, but once you figure out how to do it, you should be able to change just about any common motorcycle tire using the Rabaconda. Is it as easy as an electric or hydraulic machine- no. You have to put a little muscle into it, but because the Rabaconda machine holds the wheel securely, has a ratcheting bead setter and a long handle for the bead breaker, it makes the job of changing a tire, tremendously, easier. The bead grease they provide makes mounting the new tires a lot easier, and you can use it to remove the old tire, but a spray bottle of soapy water works just as well for removal.

The Rabaconda is very well made, but it's not indestructible. In my time with it, I've bent the main spindle (it unscrews from the machine so it can be replaced easily); the little plastic end caps tend to pop out of the tubing, even though they are riveted in place; the rubber/silicone grip on the bead breaker handle slowly slips off during use; and I just recently had a clamp screw fail. Some of that could be caused by operator error, but for the price of this machine, it needs to be able to hold up against even the dumbest, clumsiest, meatheaded doofus... whoever that might be. That said though... Rabaconda's full lifetime warranty and their customer service is outstanding. I merely had to contact them, tell them what my issue was, and within a few days, the new replacement part was at my door- no questions asked. They firmly stand behind their product and that speaks volumes about this company.

Balance Is Everything

Let's talk about the balancer, really quickly. A lot of you may be thinking, "I could just use balance beads instead of buying a balancer" and to that I say, sure, you can do that. You can do a lot of things to save money, and I'm sure that most of that stuff will be okay. Balance beads are okay, but in my opinion (based on my own experiences), they are just okay. For a truly balanced tire, you need actual weights. Some people in the balance beads corner might be feeling some tension in their necks right now, and to them, I say- calm down and let me explain.

Balance beads are typically made of glass, ceramic or steel and are generally best for large, oversized tires. Because they sit in a pool inside your tire, you don't get any balancing affect until the centrifugal force of the tire spinning forces them to their respective "balance points." This means at low speeds- you don't have much, if any, balance, but on large, oversized tires (such as you might find on a 4x4), you won't notice this because the tires themselves will absorb much of the low-speed vibrations. On a motorcycle, however, with much smaller tires and much stiffer sidewalls, the imbalance at lower speeds will be a lot more noticeable. Because the beads dynamically adjust to the conditions, beads are best for Adventure bikes and are okay for some larger cruisers and touring bikes. Weights, by comparison, provide a precise and immediate balance which is best for any kind of performance machine. I don't know about you, but I consider my motorcycles to be performance machines, so I don't run balance beads, just like I don't use a car tire as a rear tire. Just because you can, it doesn't mean you should.

The Rabaconda balancer comes with everything you need, except the weights, although they do sell those now. Since adhesive weights are, for the most part, disposable, I picked up a couple of boxes from Amazon- silver and black, to match most wheels I'd be working on. I'd also recommend getting a roll of masking tape and a level (if you don't already have one). The level will help you set up the balancer nice and level before you hang the wheel, and the tape will hold the weights in place before mounting them, as you determine how much weight you need. 

Balancing the tires is both easy, and oddly satisfying. Once I got it figured out, and I was able to get my technique dialed in, I must say that it might just be my favorite part of the whole job. The Rabaconda balancer is what is referred to as a "static" balancer. That is because it uses gravity on a static wheel, or in other words- a wheel that is not in motion- to indicate the imbalance. Basically, the wheel rides on a perfectly straight and centered axle shaft, which rides on perfectly smooth bearings, and when the wheel is static, gravity will pull the heaviest part of the wheel to the bottom. Then, you just need to add the appropriate amount of weight to the opposite side of the wheel to offset the heavy side, or... you guessed it- balance it out. 

There are other static balancers out there- many of which are much cheaper than the Rabaconda. I've never tried any of them, but I can tell you that after seeing the quality of the bearings, metals, machining and tooling of the Rabaconda balancer, I can't imagine that any of those cheaper options would even come close to the same quality. A balancer, by the very nature of what it does, must be a precision made tool, so if you do look at those other options for your own shop, I'd recommend that you take a very skeptical look at the materials it's made of and the quality and precision of how it's made. The Rabaconda might be a little overpriced, I'll admit... but as I've said enough times that it could be a slogan- "cheap stuff isn't good and good stuff isn't cheap."

Pros, Cons And Recommended Add-Ons

For those of you that skipped ahead and only came here for the pros and cons, shame on you for missing out on the best parts of the blog... but here you go:

Pros- convenience, relatively easy to use (once you figure it out- instructions are for virgins), cost-savings after you do enough tire changes, quality of the machine and Rabaconda's customer service.

Cons- expensive- but will pay for itself after enough tire changes and balancing, a little awkward to use, small details could be better (plastic end caps on tubing comes off and the rubber/silicone grip on the handle slips and works itself off during normal use).

Add-Ons- In my opinion, if you are looking for a tire changer, go ahead and spring for the balancer, too. After all, if you're going to take the time to mount your own tires, why the heck wouldn't you want to balance them too? Get a box of wheel weights, a roll of masking tape and a level if you don't already have one. You can get a spray bottle from your local dollar store for next to nothing, so get one of those and fill it with soapy water to make tire removals a bit easier. You'll also need a valve stem core removal tool, for removing the valve stem core before breaking the bead. It's an inexpensive tool that you can get just about anywhere that sells bicycle tube patch kits. One other thing I didn't mention before- setting the bead can be tricky on certain tires (I'm looking at you, Harley-Davidson pre-2009 Touring models). One trick that helps, if you don't have a bead blaster, which is basically a tool that forces a high volume of air into the tire at an explosive speed, in order to get the beads sealed, then you can use a ratchet strap wrapped around the circumference of the tire to help "squish" the sidewalls out enough to get the air into the tire. This is a pain in the butt, though... so if you're going to do enough tire changes to justify it, get yourself a bead blaster. 

Final Thoughts

It took me a few months of having my Rabaconda before I really put it to use. Once I did, though, I've used it quite a lot. I've done at least 12 tires so far, and it gets easier each time I do it. Technique is key, patience helps. Personally, I value my time above all other things. It's the one thing that we have a finite amount of. If we're lucky, we get 70-75 good years in this world. No matter how much money we earn, save, borrow or steal, we can't buy more time. We have as much as God gives us, and only He knows how much that actually is. So, when it comes to saving, I choose to save my time over my money. With that said, I do understand that it takes some money to be able to make the best use of time, hence the "investment" concept. I chose to invest in the Rabaconda, because I knew how much time I've spent driving to shops and waiting for someone to do something for me, that with the right tools at my disposal, I could do for myself. I also had a reasonable idea of how much time I would spend, if I didn't make this investment. 

For me, the Rabaconda tire machine and balancer was a good investment. For the amount of money that I've saved myself, my son, and my friends, as well as the couple of hundred bucks that I've made with it, it has almost paid for itself in the first year. It might not do that for you, so you'll have to figure that out for yourself based on what you'll do with it, and based on how you value, and spend your time. What I can tell you, is that it's well made, using high quality materials, it works as claimed, folds up and stores away easily and it doesn't take up much space in the garage. I can also tell you that it works on everything from a late model Road King Special to a vintage XR600. The balancer is precise and it works flawlessly. It's like putting the icing on the cake- it's the last step, it's easier to do and it's pretty fun, too. 

For me, being able to mount and balance tires at my home garage is just one more, very valuable tool, in my toolbox. I enjoy working on motorcycles, I'm pretty good at it, and it gives me a sense of pride that I can do it myself. It also gives me the opportunity to save some of my most precious of commodities- my time. 

No matter what you choose to do, make sure it's the best use of your money, but most of all- your time.

Until next time, MotoReaders,

Ride safe and make good choices!

 

            

Wait, was that it?

The 2026 "Chapter 2" Reveal was a Flop

Well, Harley-Davidson's "Chapter 2" reveal of the 2026 models has come, and gone. But for those of us who have been waiting for something new... something truly new... it's safe to say that we are more than a little disappointed. 

For example, we've been waiting for the return of the Road King in models other than the Special, such as the Classic, Standard and maybe even a new take on the Custom, or maybe an actual Softail Standard (instead of a rebadged Street Bob). We've also been hoping to see some new models, like a sub $15k Pan America... or... oh yeah... the all-new $6k entry level cruiser they keep teasing us with. Yeah, we didn't forget about that one. But, after all the buildup over the past few months, all we got was more CVO models that most of us can't afford (or just don't want).

Let's look at todays numbers, shall we? 

Look, I love my Road King Special... and I have absolutely no plans to replace it, but it looks like the MoCo is still riding Jochen Zeitz's "premium brand" train and I'm here to tell you... it's a bad idea.

I bought my first Harley-Davidson motorcycle, a 2009 Road King Classic in my mid 30's. I bought it new, right off the showroom floor. It was expensive, sure... but by comparison to its Japanese competitors, it was reasonably priced for a "premium motorcycle." I don't remember exactly, but it was right around $19k for the upgraded "Classic" model. A base model was going for around $1500 less, I believe. An Ultra Classic Electra Glide in 2009 was just under $23k back then. By comparison, a 2009 Yamaha Stratoliner "S", which would be a fair comparison to the Road King Classic, had a price tag, just under $17k and the 2009 Honda Goldwing, similarly equipped as the Ultra Classic, was going for just under $24k. Since Polaris had not yet resurrected the Indian name in 2009... the only competing American machine was Polaris' Victory Vision Tour, which entered the conversation with an MSRP of just under $23k for the "Tour Premium" model. Opinions vary, but in my very humble one, the only motorcycle of these three big tourers that didn't look like it was beamed down from an alien mothership was the Harley.

The Ultra Classic name has obviously been sent to the archives, but the bike itself returns for 2026 as the Street Glide Limited. The MSRP of this machine sits awkwardly at $32,999. Meanwhile, the Goldwing Tour comes in at a smooth $29,500. Since Polaris has brought back (and recently sold) Indian since the '09 model year... their current competitor to the, fork-mounted fairing equipped, Street Glide, is the Roadmaster. The Roadmaster is offered with two, yes TWO engine options and five different models, with the MSRP ranging from $32k to $42k for the "Elite" model. Compare that to the Street Glide Limited, which only gives you two choices- $33k for the Limited, or a whopping $52k for the CVO.

Bad Business

I don't know what demographic the MoCo's sales and financial analysts are looking at to decide the new motorcycle pricing, but they are obviously confused, or simply overlooking, the core demographic of motorcycle riders in the United States (and abroad). Apparently, they had lunch with Indian's analysts at some country club full of old rich folks and came up with the misconceived idea that most motorcycle riding Americans are making over $200k a year. The reality is, the median income of American households is just shy of $90k a year. in 2009, that number was around $50k a year. I know what you might be thinking... the 2009 motorcycle prices reflect around 40% of the median household income, which is about the same for today. The problem with that math, is that it doesn't figure for everything else. Things like mortgage rates, the price of gasoline and the cost of groceries has nearly doubled since 2009. That means that most American households have, significantly, less "disposable" income. From the simplest perspective- making a product less attainable for the majority demographic, is just bad business. 

Harley-Davidson has been teasing us with promises to lower prices on current models, bring back some of our favorites, and even offer new, entry-level motorcycles. From what I've seen so far, the curse of Jochen lives on. I really want the MoCo to be successful, but they aren't listening to me (and by me, I mean us, the working class folks that make up the bulk of their annual sales). They continue to try to appeal to the "McMillionaires" who are living off their daddy's money or earning a living by degrading themselves in front of a camera, but the reality is, those folks aren't buying motorcycles. The people buying and riding motorcycles and immersing themselves into the motorcycle culture are who they've always been- the blue collar, working class people. 

Mr. Starrs... can I call you Artie? Great. 

Artie... let's talk, my man. I know you did some great things for Top Golf, but you have your work cut out for you with H-D. Harley-Davidson isn't a fad. It isn't a passing cultural trend. It's a legendary American Company, built on the blood, sweat and tears of the very men and women that it is ignoring now. The founders would, no doubt, be impressed with the technology and designs, but I don't think they'd approve of the, apparently ongoing, plan to price this iconic machine out of reach of the working man. Your true core demographic is still out here. The bullshit idea that we are getting older and starting to die off is imbecilic. Those so-called "market analysts" are wrong. Most of us are getting older, sure... but guess what? Our kids are adults now, making their own money, and they grew up watching their super cool parents ride Harley-Davidson motorcycles... and now they are riding them, too. They are, and will be, the future buyers of Harley-Davidson motorcycles.... as long as the eggheads don't price them out.

Final Thoughts

I still believe that Harley-Davidson is the best motorcycle on the market. The tech is getting a bit ridiculous, but they have to change with the times and I get that. The reality is there are other options, though. The Japanese motorcycle makers have withdrawn a few of their big cruisers from the market, but the ones in showrooms are big, powerful, dependable and relatively inexpensive. With Indian being under new ownership, we'll have to wait and see what their future is, but for now... they have some competitive offerings. Let's not forget about the Brits, Germans or Italians, either. All of the Europeans are eyeing the, actual, middle class motorcycle demographic that the fancy pants executives in Milwaukee have been (and apparently still are) forsaking. 

I really hope that we see some new, mid-year releases of new models for 2026. I really, really, hope that if they ever do release the "entry level, $6k motorcyle" that has been leaked as being named the (new) "Sprint"... that it is not that re-branded Chinese atrocity that they're using for the Rider's Edge classes. 

For now though, while we're all waiting for the next page in Harley-Davidson's book to turn, I'm going to go log some miles while the sun is up and the gas prices are down.

Until next time, MotoReaders...

Ride safe, and make good choices (this goes for you, too Artie).

MotoReview- Viking Bag’s Dagr Sissy Bar Bag

MotoReview- Viking Bags’ Dagr Sissy Bar Bag

Well, MotoReaders, as promised, I humbly submit to you, my review of the Viking Bags 22L Dagr sissy bar bag! 

Okay, first off- in the interest of FULL disclosure- I did not buy this bag, I do not work for Viking Bags, I am not related to anyone (that I know of) that works for Viking Bags and I do not own any stock in Viking Bags, nor will I benefit from a positive review of, or suffer from a negative review of, this bag (or any other items I review on my site). That said, let’s get to it, shall we?

Initial impression

 When I arrived home from work today, I was excited to see a decent sized brown box, waiting for me at my driveway. I anxiously picked it up and noticed that it had a little heft to it… again, a wave of pleasant surprise and satisfaction washed over me. Once inside, I opened the box to find a nice sized bag wrapped in a clear plastic bag that was tied. Had it been raining, I’m confident that the cardboard box’s contents would have been safe and dry inside. After plucking the bag out of the box and unwrapping it like an impatient child at Christmas, I removed the hefty, well made and very sturdy bag from it’s plastic cocoon. 

I, gratuitously, decided that the best place to take some photos of the bag was on my work bench, where I’ve been working on resurrecting the MotoWriter Dyna, which, if you haven’t heard (or, read about here on the site, yet… click the link here —>>) I crashed a few months back. Yes, I must also admit that the MotoWriter wall sign, that my good friend Nick over at The Wood Shop made for me, makes for a nice background detail… again, I know it’s gratuitous, but hey, I’m grown and I do what I want! 

Digging in

Hearing a distinct rattle when handling the bag, I feverishly began unzipping the compartments to see what goodies the bag contained. I was pleasantly surprised to find that the two side pockets are big. Not, “hold a pair of jeans” big, but definitely “keep your phone, GPS, keys, wallet, Snicker bars, and maybe even some miscellaneous H-D poker chips or challenge coins” big. The best part is, that there are two of them and they are equally large, not like some of those bags that have the random sized compartments that make no real sense. The main compartment held the culprits of the rattling sound- a rain cover, a shoulder strap and two (2) smaller straps for tying the bag to your bike in, probably, any way that you might want. 

In this photo, I’ve got them propped open with a marker (on one side) and a roll of painter’s tape (on the other side). The main compartment is big and has plenty of room for a couple of pairs of socks, underwear and maybe a t-shirt or two if you pack them tight enough (disclaimer- I wear a size large t-shirt, so I can make it work… if you’re bigger than that, it might get tricky for you). Viking also claims that the bag will hold “31 cans”… but I’ve yet to try that, as I’m more of a bourbon man. The “flap” (if you can even call it that) opens up and it has two detachable straps on either side to keep it from flopping open and dumping it’s contents. They are adjustable, so if you only want it to open a little bit, you can. If you want it to open all the way, adjust them out or simply unclip them. I, very loosely, refer to the flap as a “flap” because it doesn’t “flap” at all. There isn’t anything on this bag that is “flappy”, actually. The “flap” is very well made and semi-rigid to keep the contents of the bag safe, while helping to maintain the bag’s shape. On the inside, it has a mesh, zipper close, compartment that could be used for any small items you don’t want falling out of, or getting mixed up in, the main compartment. Did I mention the security? No? Well, I will. The main compartment can be closed and secured with a small padlock- think, “TSA approved.” It won’t keep anyone from stealing your bag, but it will prevent anyone from rooting through your bag and gawking at your weird under britches that have the hearts printed on them. 

Inside the main compartment is another zipper that runs along the entire inner wall. Snooping around and unzipping it, reveals the inner plastic “wall” that gives rigidity to the outside of the bag and maintains the overall shape. The plastic is thick, maybe 3/16” or just a tiny bit thinner and its made of a nice flexible ABS plastic that really looks like it can take a beating without shattering or cracking. The top of the bag has a sewn-in, and riveted, nylon strap handle that has a plastic “comfort strap” (that’s what I’m calling it… maybe the folks at Viking Bags can use that). The handle is well made and will, no doubt, be able to easily hold up to all of the weight that can be crammed into this bag- be it 31 cans of your favorite beverage, or all of those “heart” boxers that your aunt Susie gave you for your birthday.

The intelligent design didn’t stop at the back of the bag either. The strap to attach it to the sissy bar is wide and thick and will easily fit over most sissy bars (or back rests for you folks that are offended by the word “sissy”). It comes with something that, if I’m being honest, I’ve never seen before- two vertical, and removable, metal rods. The rods are used to adjust for the width of your bike’s sissy bar- a very cool feature and one that was very well planned and, from what I can tell so far, very well executed. There are D rings on the rear of the bag that can be used with the straps provided, to secure the bag to your bike, or, convert the bag into a backpack! Very cool! 

Overall Thoughts

My overall first impression of the Dagr bag is that it is very well made. It has what I like to call “smart engineering and design” all throughout. It’s obvious that whoever designed this bag, did so intentionally. The name, Dagr, is an old Norse word meaning, basically, “day” and that’s exactly what this bag is perfect for (although, I can see myself using it on overnight trips, too). 

Quality is top notch- the stitching is sturdy and the materials are very nice- a mix of nylon rip-stop and a rugged, rubber composite that blends very well into the design, making this bag not only functional, but attractive. The size is perfect for holding a variety of necessities on a road trip- sunglasses (and reading glasses for those of us who are getting a little older these days), sunscreen, gloves, snacks, and whatever else you want, or need, to bring along to make your trip a little better. 

While the MotoWriter Road King has big, cavernous saddlebags and a detachable trunk for my longer trips, I plan on using this bag on the MotoWriter Street Bob, once it’s put back together and ready for road trippin’ again, that is.

Durability, longevity and affordability 

I can’t, personally, speak on affordability, as I didn’t actually buy this bag, but I can tell you that, for the msrp of $69.99, and a current promotion (as of today) of $59.41, I think it’s a steal. This is a bag that you will keep from bike to bike until your significant other or one of your kids (or grandkids) decide to “appropriate” it for their own use. It looks good and is well made. 

As for the durability or the longevity of the bag, I obviously won’t be able to speak on this yet, either, as I just got this thing today. I will honestly be surprised if it doesn’t outlast some of my other gear (and maybe even one of my bikes), but I’ll do a proper follow-up review in 6 months, and another one at a year, to give you some updates on it, in case you’re still not convinced. 

Final thoughts

I’ll leave you with this to ponder- how much do you spend at the coffee shop every month? How much do you spend on fast food? How much do you give to your co-workers’ kids that are always selling cookies or doing some other kind of fund raisers? If you’re an average person, I’d be willing to bet that you could buy two of these bags a month, every month, for what you spend in coffee and fast food alone. So, why not take a chance and get a bag that will, absolutely, last longer than all those McBurgers and Starspressos. Go check out Viking Bags (by clicking the link at the top right of this page) or by clicking here and check out what they have to offer. 

Instead of spending a hundred bucks a month for some overpriced drinks or some, potentially cold, fries that will only give you joy, happiness or satisfaction for a few moments, take a break from the drive-thru line for a few weeks and buy yourself a bag that, I suspect, will give you years of service. Hell, what’s the worst that could happen? If you only use it for one year’s worth of road trips, it will still have given you more use than those deep fried fart sticks and that chalky ass, coffee flavored, sugar water. Make your coffee at home and brown bag your lunch for a month and get something that will actually bring you some joy- the Viking Bags Dagr sissy bar bag. (<<— shameless plug, but click the link and check it out for yourself!)

Now, I better get back to working on the MotoWriter Street Bob, so I can put this bag to good use before the next review!

Until next time, MotoReaders… ride safe and make good choices!

120th Anniversary Lineup… my thoughts

 

Harley-Davidson’s 120th Anniversary lineup… Boom or Bust?

Well MotoReaders… there it is, your “new” bikes for what could arguably be one of the most significant anniversaries in Harley-Davidson’s history. So, the question is, did they knock it out of the park, or did they strike out? If there are any H-D execs reading this (which I hope so, but sorta doubt) this next part is directed to you- if this is all you have in your trick bag, I’ll be honest- I’m sorely disappointed. 

The bikes

The paint is gorgeous, the bikes are boring. Sorry, but they are. You guys had a great opportunity to introduce some really cool machines, but it feels like you just phoned it in. The only “new” model is the Road Glide trike and, as a younger old guy, or an older young guy (depending on how you want to look at it), I’m still young enough to handle a two wheeler, but “established” enough to afford a bigger touring bike, so for me… another trike is just plain boring. I’ll keep my 2017 Road King Special (especially now that I have fixed all the things you guys fell short on with that one). You “brought back” the Breakout? Ugh. The only bike that has even garnered a second look from me is the Nightster Special, but that one isn’t even a new model for ‘23. To make matters worse- the “Special” still sports the 975cc mill for 2023. Why not put the 1250 RevMax engine from the Sportster S in the Nightster Special? What exactly is “special” about the Special, anyway? Black paint and a quarter fairing (that was on the previous year model)? Come on… we, your customers, deserve better.

Jochen, are you listening?

Jochen, buddy… listen to me for a minute, I know you want the best for the MoCo, so do I. That’s why I’m offering this advice for free- bring back a twin shock, big twin powered line- yes, I’m talking about the Dyna, for 2023. Do you want to get some loyal H-D customers back? Give them a ground-pounding, M-8 powered bruiser. Something loud, powerful and highly customizable. Something that is raw, fast, classic and true to the H-D spirit. The Softail line is great, but we all know that the LowRider, the Fat Bob and the Street Bob are supposed to be Dynas. They were born as Dynas and they died as Dynas in 2017. These new Softail versions are best described as "Dyna tribute" bikes, for no reason other that to just keep the names alive and we all know it. 

Do you want me to buy a new bike? Offer me an M-8 powered Wide Glide. A true, twin shock frame with mini-ape handlebars and a tall sissy bar. Build it with an old-school ducktail rear fender, and offer a sick, diamond stitched king and queen seat in the P&A catalog. Bring back the Super Glide and spin some variants off of that like Willie G did back in the day. THAT would be an exciting lineup. While we’re talking about "come back" bikes… let’s talk about the Breakout for a second. When you wanted to bring back a discontinued Softail model, your best idea was to bring back... the Breakout? Not the Deluxe? What? Really? There is so much you could do with the Deluxe in terms of trim and customization. While I’m at it… what idiot said it would be a good idea to kill off the Road King? Has it ever crossed your minds that, not everyone is into the blacked out Specials? Personally, I happen to love my FLHRXS, but I know that not everyone does. There is a significant amount of people in the H-D market that want the classic, chromed out, do-it-all machine that is the Road King. A bike that has Touring DNA mixed with cruiser styling at a, somewhat, reasonable price tag. Enough of that… y’all probably aren’t reading this anyway. If you want to hear more, have your people call my people. 

Am I being too critical?

What do you, my MotoReaders, think? Am I off base here? Am I being too harsh with the Milwaukee Crew? Look, I’m not trying to be an ass… it’s just frustrating to see wasted opportunities. I’m usually the first to admit that I’m no expert. Hell, I’m just some random guy that pays a few bucks a year for a web address so that I can share my thoughts with whoever is out there that might want to read them. I’m not making any money from my blog and I’m not making any money on my YouTube channel. Nobody is compensating me for mentioning their products or creating an occasional video. No, this blog and those videos on my YT channel are a labor of love and it’s from that love where this post is coming from. 

By the numbers

I have always been a huge fan of Harley-Davidson Motorcycles. Even before I bought my first one in 2009, I always loved them. As a kid, I can remember sitting in the back seat of my parent’s car, looking out the window and seeing them running down the highways. Those loud, raucous machines usually had some bearded, leather clad dudes riding them and I remember thinking how cool the bikes looked, blazing down the asphalt. When I talk about missed opportunities, I’m talking about this company that has such a rich heritage emblazoned on so many of our memories, slowing killing itself off by not staying true to itself. Harley-Davidson was never intended to be a “luxury” brand. It was never intended to be a brand that only the rich could afford. H-D was a brand that anyone could afford. Blue collar guys could go to their local dealership and buy a brand new motorcycle. Jochen and his boys need to return to that ethos. I’m not saying they need to build cheap, junky bikes just to stay competitive in the market, far from it. I’m saying that $20 grand for a basic, cruiser motorcycle is a bit ridiculous. For example, check out these numbers:

120th Anniversary (2023) prices, versus the 110th Anniversary (2013) prices.

• Nightster- $13,500 (Iron 883- $8,000)
• Nightster Special- $15,000 (Forty Eight- $10,600)
• Softail Street Bob- $16,600 (Dyna Street Bob-$13,000)
• Fat Boy- $20,200 ($17,000)
• Heritage Classic- $21,200 ($17,600)
• Street Glide- $22,000 ($19,800)
• Road King Special- $24,000 ($19,900 for a Road King Classic)
• Ultra Limited- $29,800 ($24,200)

I won’t even list the obscene prices of the CVOs or the Trikes. Don’t get me wrong, I understand how inflation works and I also recognize that I chose a ten year gap to compare my prices, but let’s be honest with ourselves for a moment- the entry level Harley price increased by over $5,000 in only ten years! Want a more recent comparison? Fine, I can play that game, too. The Iron 883 in 2017 only had a price tag of $8,950 that’s less than a one thousand dollar increase. The 2017 Street Bob (the last year of the Dyna) only saw an increase of a paltry $850 bucks, for a MSRP of $13,850 and the Ultra Limited sat on the showroom floor for $27,000. Those are 2017 price tags and even then, they were astronomical for a lot of blue collar folks, but at least they were somewhat attainable with the right credit score and a bit of financial planning. 

You get what you pay for... or, do you?

Look, I’d probably be a little less critical of the prices if I hadn’t seen, first hand, questionable quality in my own $22k (2017 price) Road King Special. Parts falling off, rust on fasteners and mirror stems and so on. It might have been a different story if my bike was a yard bird (you know, a bike that is parked outside all the time), but it’s been garage kept since I rode it off the showroom floor. Yeah, I’ve ridden in rain on it, but that definitely isn’t a common occurrence and it gets washed and waxed regularly, so there’s really no explanation for those issues other than sub-par finishing or just piss-poor design. Only time will tell if the finishes and designs of the new  bikes hold up better than my 2017 has. For Jochen’s sake, I really hope they do, too because his idea of making Harley-Davidson a “luxury” brand might just be the death blow if they don’t. I’ll tell you something else, too- if the design team doesn’t come up with something fresh, and do it soon, then H-D might just be losing a few more customers to its competitors. The MoCo needs to remember that they are no longer the only kids on the block and they're also just barely, if at all, still the most popular. Now that the family from Springfield has come back and bought the house next door- those kids are starting to get more and more attention. Then there are the kids from the United Kingdom, those other kids from Germany and let’s not forget about the kids from Britain (the ones that moved to India)… and then there are all the kids from Japan that have been there for decades, building high quality, extremely dependable and very affordable machines. The toughest part for H-D here is, they used to have one thing that all the others didn’t- a high quality product that was attainable by the very people that designed, engineered and built them, right here in the good old U S of A. Over the years though, quality has gone down, while prices have gone up. I don't care what business you're in... that combination is always a recipe for disaster.

Final thoughts

It's still only the beginning of the year and Jochen has already teased that more new models are on the way for this 120th anniversary year. I'm hopeful that there will actually be something new, cool and fresh that I can get excited about because, honestly, I haven't stepped foot in an H-D dealership in quite a long time. That is a far cry from just a few years ago when I was able to come up with some reason or another to go see what was new on the showroom floor at least a few times a year. Hell, my local dealership knew me so well that they were trying to recruit me for their team because not only did I give them a lot of my business, I also brought them a lot of business through my referrals. While I'm disappointed on the 120th Anniversary's launch, I'm still hopeful that the MoCo can pull a few rabbits out of their hats and make me want to come in and take a test ride. After all, one really fun part of being a motorcycle enthusiast is the process of buying a new bike, and I still have enough room in my garage for one or two more. I'm not saying that I'm in the market for another new motorcycle, but if a real, twin shock, big twin Wide Glide was to make a come back, I might be inclined to run over to the dealership on my way to the bank. 

Ride safe and make good choices, MotoReaders! 

HELLFIGHTERS!

The Hellfighters

Hellfighters... what a cool name, right? But who, or rather what, is the Hellfighters Motorcycle Shop? Check out their website by clicking here. If you're not really in the mood to do any more clickin', keep reading and I'll give you the MotoWriter rundown.

So much more than a motorcycle shop

Hellfighters is a motorcycle shop in Laurel, MS (<click the link for more info), but it's not just a motorcycle shop, it's a swap meet, a gun store, a gift and home store, a restaurant, a chapel, a Rhino Jeeps dealer, and a Christian Ministry, all wrapped up in a huge repurposed industrial building that has been beautifully converted to house it all.

The Hellfighters shop is truly a sight to behold. The last time I was there was several years ago and it was pretty cool then, albeit, relatively small and pretty cramped up. But on this latest visit, just a couple of weeks ago, I discovered that the old building was vacant and the new building, which is situated right around the corner, was clearly open for business... ALL of the business. The new building is over 83,000 square feet of awesomeness. Upon walking in, I saw a massive inventory of used motorcycles, with cool movie props spread around for our viewing pleasure. My wife perused the home decor section for at least half an hour, and my son and I got lost in the rest of the place. Then, after seeing the main section, we saw the swap meet. Let me tell you about the swap meet... it was a huge room, filled with every motorcycle part you could possibly need. I won't get into too much detail about the rest of the place, because honestly, I don't think I could do it justice by mere words. You really do need to go check it out in person. 

So, why is this place so big? Why is it so popular? How does a Christian Ministry turn into a motorcycle destination, especially in a modern society that seems to reject, or at the least question, God's existence? The answer, is God.

The Mission

When so many people are afflicted with pain and consumed by addictions of every kind, the Hellfighters Ministry is right there, willing and able to help them find their way to salvation. They are not only spreading the word of God, but they are actively practicing His ways and trying to help save as many lost souls as they can. According to their website- 100% of the profit (that is every cent) goes to Mission at the Cross in Laurel, MS so that men suffering from addiction can find recovery, and Jesus, for free. Mission at the Cross was started by the founders of Hellfighters, Richard and Gina Headrick back in 1998, from a little ministry service that they called "the Bum Ministries." Read more detail about it by clicking here- it really is a neat story and really proves that God works in mysterious ways, and often, He works through the most unassuming people among us, people that we might not normally notice or if we do, we might try our best to avoid.

Location, location, location

They say that location is everything and I'll agree with that. Laurel is a pretty nice place and, it's even gained notoriety from the extremely popular HGTV show, Hometown, which follows Ben and Erin Napier as they renovate one place at a time and ultimately revitalize areas of small, otherwise forgotten little towns. They do great work and show their love of small town USA, again and again in their efforts. I'm not really big into watching television, but I have seen their work in Laurel, MS and in Wetumpka, AL and I'm pretty impressed with it. They've really helped to revitalize these little towns and the small, locally owned businesses there are thriving. As for the location of the Mission at the Cross and the Hellfighters Shop, Laurel is, once again, an ideal spot on the map. It's close enough to be accessible from several larger urban areas, where problems with homelessness and addiction seem to be the worst, but it's far enough away from them to help those in need focus on their recovery. It's also right off of I-59 (and you can't miss the signs). 

Go check 'em out

Make a point to go visit the good folks at Hellfighters USA. Go check out the good work they are doing and, even if you don't need anything, buy a little something from them anyway to help in their mission of helping those poor lost souls to find salvation and recovery. You never know who you might be giving a second chance to. They are open most days from 8am until 5 pm (the others, they're open until 6 pm), except of course on Sundays, when they close the doors to rest, and give thanks to our Lord and Saviour, Jesus Christ.

One thing I always try to promote here in my little corner of the interweb, is the encouragement to live your life in a good and just way, to be a good person and to live in such a way that honors God and spreads good will. I think that's why I like the Hellfighters so much, because they aren't just writing about it, they have the means to do good and are actively helping people become better versions of themselves, and I think that's a really awesome thing to do.

Ride safe, make good choices and help your fellow man if you can and, if you can't, then try to help those that are already doing it.

MotoWriter side note:

By now, this should go without saying, but I'll say it again- I'm not paid by the Hellfighters, the Mission at the Cross or any other entity for my posts. I just like to review different things and places that I see and, being that I like to stay positive on my blog, I usually only write about the things and places that I really like or that really make a positive impact on me. 

I've often said that I'd be happy to get on a company's payroll, but for this one, I'll forego my previous sentiments. You see, The Hellfighters' mission is not only an honorable endeavor, but one that serves to improve our society, spread the gospel of our Lord and save lives. Even if they did offer to pay me for my humble words, I wouldn't accept their money- I would gladly donate my time and my words in service to their mission. 

-Thank you for your time and support, MotoReaders.